It takes only a few minutes (or even seconds!).

But, when you're starting out with the system give yourself plenty of patience and time. Many don't perfect Lashify on their first try, but many do. Regardless, the first few attempts at application should be about getting the placement right. That's called Lashify Level 1.

It takes an average of three tries before it clicks. So, don't get discouraged! Eventually you'll be able to apply in minutes! It's important to watch our video tutorials, those are the keys to Lashify success.

That's the beauty: the choice is yours. You can apply and remove daily, or wear for up to 10 days! It's all a matter of preference, lifestyle, application method, and proper care.

Longevity comes with time and practice. We like to say by your third application you will be an expert. For your first few applications expect to wear your lashes for the day. You must first understand how much bond to use, where the Gossamer Lashes need to be placed and proper aftercare. Once you’ve mastered these 3 things you will start to see an increase in your wear time. Or you can simply swipe one coat of bond and wear for the day. For longest wear we recommend the Frosting™ Method.

Our Gossamer® lashes were designed to be virtually weightless in order to provide a damage-free experience, relieving your natural lashes from any weight and tension. After several uses the Gossamer lash will slowly disintegrate, as it's intended to in order to prevent damage to your natural lashes.

Use the Fuse Control® Wand to place the Gossamer lash on the underside of your upper lashes, leaving 1mm-2mm between the wet line and Gossamer.

TIP: After application, refrain from getting Gossamer lashes wet until the bond has had time to set. Minimum of 12-24 hours.

Start with a very light coat of Whisper Light in black through your natural lashes and wait 20 seconds.

Repeat, this time by dabbing Whisper Light in black to the base of your natural lashes, concentrated above the root and wait 30 seconds.

Proceed by adding dots of Whisper Light in clear, about 1mm-2mm above the water line. This will serve as a marker for where to apply the Gossamer lash. Brush the white bond upwards (we call this Frosting).

Just remember: a little bond always goes a long way.

No cyanoacrylates. No formaldehydes. Ever.

Our bonds are exclusively designed to hold Gossamer lashes in place. Biotin and Micro-flex™ technology create a flexible and nourishing cushion underneath the lash line, protecting the roots of lashes from weight and tension to provide a damage-free experience.

Whisper Light Bond™ is the only bond available on the market that was developed and formulated in an ISO approved cosmetics manufacturing facility.

Once you become a Level 2, Lashify is water resistant. You can easily shower, swim, do water sports, and exercise while wearing Lashify.

However, long exposure to steam will loosen the Gossamer® lash and soften the bonds. If they get wet, allow them to fully dry before fusing. If they loosen, simply add extra bond and fuse.

Remember: After application, refrain from getting Gossamer lashes wet until the bond has had time to set. Minimum of 12-24 hours.

Absolutely not.

The Lashify system was created to protect the integrity of your natural lash, and we are committed to maintaining their health.

Our Gossamer® lashes are virtually weightless in order to provide a damage-free experience, relieving your natural lashes from any weight and tension. They will slowly disintegrate after several uses in order to prevent any damage to the natural lash.

Our bonds protect your lashes from weight and tension for a completely damage-free experience.

Our goal is to make the lightest most beautiful non-damaging lash possible. Our customer data shows that 90% of our customers reuse 80% of Gossamer lashes depending on their budget.

Lashify is a patented system and any company selling our technology are doing so illegally. The Underlash DIY lash extension was invented and patented by Lashify.